Best Price for Fasten - SBS modified bitumen membrane – Hongyuan Detail:
SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains) or polythene membrane etc.
Characteristic:
Good impermeability; Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack; SBS modified bitumen membrane is specially being applied in the cold area with low temperature, while APP modified bitumen membrane is applied in the hot area with high temperature; Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering; Construction is convenient, the melt method can operate in four seasons, joints are reliable
Specification:
Item |
Type |
PY PolyesterG GlassfibrePYG Glassfibre enhance polyester feltPE PE FilmS Sand
M Mineral |
||||||
Grade |
Ⅰ |
Ⅱ |
||||||
Reinforcement |
PY |
G |
PYG |
|||||
Surface |
PE |
San |
Mineral |
|||||
Thickness |
2mm |
3mm |
4mm |
5mm |
||||
With |
1000mm |
Applicable scope:
Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade Ⅰ civil building and industrial building which has special waterproofing requirement.
Storage and transportation instructions
When storage and transportation, Different types and sizes of products shall be stacking separately, should not be mixed. Storage temperature should not be above 50℃, the height is not more than two layers, in the course of transportation, membrane must stand.
The stacking height is not more than two layers. To prevent the tilt or pressure, when necessary cover the felt fabric.
In normal conditions of storage and transportation, storage period is a year since the date of production
Technical data:
SBS [Confirming to GB 18242-2008]
No. |
Item |
Ⅰ |
Ⅱ |
|||||||||||
PY |
G |
PY |
G |
PYG |
||||||||||
1 |
Soluble content/(g/m ²)≥ |
3cm |
2100 |
* |
||||||||||
4cm |
2900 |
* |
||||||||||||
5cm |
3500 |
|||||||||||||
Test |
* |
No flame |
* |
No flame |
* |
|||||||||
2 |
Heat resistance |
℃ |
90 |
105 |
||||||||||
≤mm |
2 |
|||||||||||||
Test |
No flow, no dripping |
|||||||||||||
3 |
Low temperature flexibility/℃ |
-20 |
-25 |
|||||||||||
No crack |
||||||||||||||
4 |
Impermeability 30 minutes |
0.3MPa |
0.2MPa |
0.3MPa |
||||||||||
5 |
Tension |
Maximum/(N/50mm) ≥ |
500 |
350 |
800 |
500 |
900 |
|||||||
Secondly-Maximum |
* |
* |
* |
* |
800 |
|||||||||
Test |
No crack, no apart |
|||||||||||||
6 |
Elongation |
Maximum/%≥ |
30 |
* |
40 |
* |
* |
|||||||
Secondly-Maximum≥ |
* |
* |
15 |
|||||||||||
7 |
Oil Leaking |
Pieces≥ |
2 |
Product detail pictures:
Related Product Guide:
Waterproofing Membranes Market growth will be driven by increasing demand in the construction applications by 2024 | Polyurethane Waterproofing Membrane
Indian Bituminous Waterproofing Membranes Market Opportunities and Challenges 2017 | Bitumen Waterproofing Membrane
The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Best Price for Fasten - SBS modified bitumen membrane – Hongyuan, The product will supply to all over the world, such as: Colombia, Holland, Ireland, With the spirit of "credit first, development through innovation, sincere cooperation and joint growth", our company is striving to create a brilliant future with you, so as to become a most valuable platform for exporting our goods in China!
By Sandy from Barcelona - 2016.06.25 12:48
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Danny from Jeddah - 2016.08.18 11:04